brazing seam

The effect on the microstructures of the brazing seam of Ag-CdO contact terminal and Cu contact bridge by different brazing technological parameters including temperature, holding time and joint gap was analyzed. Based on the analysis, the optimum technological criteria put forward.

分析了Ag-CdO触头与Cu触桥钎焊温度、保温时间、钎焊间隙对钎缝组织的影响，并提出了获得理想组织的最佳工艺规范。

The brittleness of brazed seam for nickel-base brazing filler metals is always paid close attention.

镍基 钎料的钎缝脆性问题,一直是人们关注的研究课题.

The Al element in the substrate diffuses into the brazing seam, forming a thin reaction layer in the interface region.

焊接母材中的Al元素向焊缝发生了扩散，在界面区形成了一层很薄的反应层。

X ray image analysis of high temperature brazing seam for corrugated plate sandwich structure

波纹板夹层结构高温钎焊焊缝X射线影像分析

The brazing-ability and quality of brazed seam of 6063 aluminum alloy brazed by Al-Si eutectic filler metal and QF flux is discussed by means of test of spread-ability and test of T joint.

本文用平百铺展试验和T型接头试验，研究了6063铝合金采用AI－St钎料和氟化物钎剂（QF钎剂）钎焊时的钎焊性和钎缝质量。

The welding residual stresses exist mainly within 15 mm from the brazing seam.

焊接残余应力主要分布在离钎缝15mm以内的区域。

A new method to improve the heat resistance of the brazing seam

提高钎缝耐热性的新途径

Effects of Heat Treatment on Properties of Brazing Seam

热处理对硬钎焊焊缝性能的影响

Influence of microstructure of brazing seam on seam strength of contact

电触头钎缝组织形态对接头力学性能的影响

Effect of alloy powder on Microstructure of brazing seam

钎缝中合金粉对组织的影响